I have found that the best heat setting is about 1/3 to 1/2 of the way up between the medium and high dots. They truly are perfect waffles every time. It is amazing. Just as good as the hotel breakfast bar where I first used a waffle maker. If you like waffles you need this device. I chose this device over the Presto 03510 Flip-side because this one had adjustable heat and didn’t require a separate battery to operate the timer. Plus it is made by Oster (I’m sure you have their blenders in your kitchen like I do) and the flip function seemed more durable. You can’t go wrong with this waffle maker. You will be very happy with it. One tip is to use tinfoil underneath for an easy clean up and be sure to oil the inside waffle plates before the first use. Other than that the rest is all self explanatory. Stay tuned for durability updates.

http://www.amazon.com/Oster-3874-0-Flip-Waffle-Maker/dp/B0012S8OWA/

The tilt mechanism works perfect and will constantly hold at any angle. One side note that I discovered is that the washers (between the knobs and the receiving female threads) have square insets that must be lined up with the square parts of the receiving female threads in order to obtain a tight functional fit. This may have been the root of those that have problems with the tilt function.

With only the basics of handyman know-how this is a very easy install (find a stud, level, drill with a 3/16″ bit, then use the supplied hex wrench to screw in the supplied screws). It does come with drywall anchors to mount without a stud but I would be careful about trying that, especially if a stud is accessible.

http://www.amazon.com/Sanus-Systems-Mount-Articulating-Displays/dp/B0002ZHF0G/

http://www.amazon.com/Philips-19PFL3403D-27-19-Inch-HDTV/dp/B00140U1LS

I am assuming that from this point you have already installed the Blackberry Desktop software version 4.1 or later and that the modem is correctly installed (this is part of the standard install for the desktop software).

To verify this, from the start menu, select control panel:

1. In the top right corner, type “phone modem” in the search box.

2. Select Phone and Modem Options

Select the Modems tab.

You should see “Standard Modem”. This is the Blackberry Modem.

Select “Standard Modem” from the modems tab and click the Properties button.

In the General tab, select Change Settings on the bottom (you must be an administrator to change these settings).

Click Continue on the User Account Control Security warning that follows.

Under the Advanced tab, you must be sure to enter the Extra Initialization Commands:

AT+CGDCONT=1,”IP”,”wap.cingular” (remember this is for AT&T phones only, for others go here)

Click OK.

Next, from the start menu, select control panel:

1. In the top right corner, type “set up connection” in the search box.

2. Select Set up a dial-up connection

Next select Connect to the Internet.

Select Next.

If you are prompted to use a connection that you already have select No, create a new connection.

Select Next.

In the “How Do you want to Connect?” box, Select the last option: Dial-up.

Select Standard Modem as the modem to use.

Enter the following information in each box:

Dial-up phone number: *99#

User name: [leave blank]

Password: [leave blank]

(I renamed my connection name to: Blackberry Connection, you can pick your own creative title)

Select Connect.

Now you have to Turn Off IP Header Compression.

To do this, from the start menu, select control panel:

1. In the top right corner, type “connections” in the search box.

2. Select View Network Connections

Next, right click on the Dial-up connection that you have just created and select Properties.

Then go to the Networking tab.

Select Internet Protocol Version 4 (TCP/IPv4) (be sure to not uncheck the box) and then click Properties.

Then click the Advanced… button.

Within the PPP link section, uncheck Use IP header compression.

Click OK to close all open dialog boxes.

That’s it. You’re done!

If prompted by the message “Internet connectivity test was unsuccessful”, see the Blackberry Forums. For other Blackberry models and other carriers follow these instructions. If you still get an error after checking all settings you can try to resend your service book by clicking your Blackberry Options >> Advanced Options >> Host Routing Table. >> HIT MENU, then register (on your Blackberry device).

REMEMBER: The Blackberry Desktop software must be running while you have your Blackberry Curve 8310 tethered via the USB cable to use the device as a modem. A few people have said that they can use the modem without a data plan without any extra charges however I have not personally tested this.